The purpose of the premises, they can be residential or non-residential;

TG Data Set: A collection for training AI models.
Post Reply
zihadhosenjm40
Posts: 742
Joined: Sat Dec 21, 2024 3:34 am

The purpose of the premises, they can be residential or non-residential;

Post by zihadhosenjm40 »

Regulatory documents contain information on the optimal sizes of windows in ordinary houses, and take into account:

Requirements for room illumination;
Room dimensions;
Natural lighting level;
Window throughput.
But, despite this, the standard sizes of plastic windows in panel houses may differ slightly, literally by a few centimeters.

This is important! There are sizes on the window market for plastic bc data india in brick, panel or Stalinist buildings.

Therefore, when constructing new buildings, developers try not to deviate too much from the established standards, so as not to create problems for themselves and the residents of these buildings.

For example, in a new brick house, plastic brown windows are installed, the standard dimensions of which are 1300 mm in height and 1400 mm in width. Whereas in Khrushchev houses, these parameters vary from 1300 mm to 1500 mm.

From this we can conclude that the standard sizes of plastic windows are a very vague concept and there are no exact figures for this.

Thus, if you know the type of building, you can roughly calculate the cost of a double-glazed window.

However, not everyone knows how to measure a plastic window correctly, so in this case, the best solution would be to contact a specialist who will do this work for you as quickly and efficiently as possible.

If you still want to learn how to measure a plastic window correctly, you will need to take into account some features, namely: the glass unit should be slightly wider or the same size in places where the frame touches the slopes; the glass unit should be slightly narrower than the slope itself.
Post Reply