What is an ash pan and how to make one
Posted: Mon Feb 17, 2025 10:12 am
Manufacturing of an ejector
The ejector can be located at the top or bottom. For home use, it is better to use units with an upper ejector location.
This will save fuel, eliminate hanging chips, and the smoke will be cleaner and safer. The risk of fading is minimal, while the draft is increased, which has a positive effect on the taste of smoked products.
The element is made of small diameter tubes. It supplies smoke to the business owner data due to the action of the compressor, which is connected to the ejector on one side.
By making an ash pan for the chimney with your own hands, you can simplify the cleaning process.
To construct such a device, you will need a pipe whose dimensions are larger than the body.
A bottom is welded to its lower part, where the combustion products will be poured. The body is installed in this pipe. As it fills, the ash pan is easy to remove and clean.
What to make a compressor from
You can buy a ready-made blower for a smokehouse in a store, but it will be cheaper and easier to make it yourself. To make the unit at home, you will need a minimum of time and materials. The following will be suitable as the main element:
computer cooler;
aquarium compressor;
window fan.
They also use ready-made car compressors or units from refrigerators, but in these cases it will be necessary to additionally make a storage device to prevent the device from overheating.
The ejector can be located at the top or bottom. For home use, it is better to use units with an upper ejector location.
This will save fuel, eliminate hanging chips, and the smoke will be cleaner and safer. The risk of fading is minimal, while the draft is increased, which has a positive effect on the taste of smoked products.
The element is made of small diameter tubes. It supplies smoke to the business owner data due to the action of the compressor, which is connected to the ejector on one side.
By making an ash pan for the chimney with your own hands, you can simplify the cleaning process.
To construct such a device, you will need a pipe whose dimensions are larger than the body.
A bottom is welded to its lower part, where the combustion products will be poured. The body is installed in this pipe. As it fills, the ash pan is easy to remove and clean.
What to make a compressor from
You can buy a ready-made blower for a smokehouse in a store, but it will be cheaper and easier to make it yourself. To make the unit at home, you will need a minimum of time and materials. The following will be suitable as the main element:
computer cooler;
aquarium compressor;
window fan.
They also use ready-made car compressors or units from refrigerators, but in these cases it will be necessary to additionally make a storage device to prevent the device from overheating.