However, this fitting can be replaced with a bunch of connecting elements. But why?

[zihadhosenjm40]

In this formula, V atm. is the optimal pressure, and Hmax is the height of the highest point of water intake. As a rule, this is a shower. To obtain the required value, you should calculate the height of the shower head relative to the hydraulic accumulator. The obtained data are entered into the formula. As a result of the calculation, you will receive the optimal pressure value that should be in the tank.

Please note that the obtained value should not exceed the maximum permissible characteristics for other household and plumbing appliances, otherwise they will simply fail.

If we talk about an independent water supply system for a house in a simplified way, its constituent elements are:

pump,
hydraulic accumulator,
pressure relay,
check valve,
pressure gauge.
The last element is used to quickly control the pressure. It lebanon mobile database not have to be in the water supply system all the time. It can be connected only when test measurements are being made.

As you can see, the pressure gauge is not shown on this diagram, but this does not mean that it is not needed at all. It will simply be turned on at the time of performing control measurements.

When a surface pump is used in the circuit, the hydraulic tank is mounted next to it. The check valve is installed on the suction pipeline, and the remaining elements form a single bundle, connecting to each other using a five-terminal nipple.

The five-terminal device is ideal for this purpose, as it has terminals of different diameters. The incoming and outgoing pipelines and some other elements of the bundle can be connected to the nipple using unions to facilitate preventive and repair work on individual sections of the water supply system.


This diagram clearly shows the connection order. When connecting the nipple to the hydraulic accumulator, it is necessary to make sure that the connection is tight.