Self-tapping screws 90, 75 and 50 mm;
Posted: Mon Feb 10, 2025 4:45 am
Calculation of the amount of lining
You also need to prepare the working tools in advance.
If the balcony is cold, you should take care of the choice of insulation. Consult with a specialist on how to lay the insulation.
Consider what kind of finish the finished sheathing will have.
Balcony cladding can be done efficiently georgia mobile database if you have all the tools and materials listed below.
To work you will need:
high power hammer drill or drill;
screwdriver;
drills (1 mm, suitable in size for self-tapping screws);
high-quality drills, 4 and 6 mm in diameter;
hacksaw or jigsaw for wood;
level;
a simple pencil, tape measure, set square;
hammer and axe;
30 mm nails with a large head, dowels; for perfectly flat surfaces, dowels 6*60 are suitable, but for minor irregularities - 6*100.
Tools for finishing a balcony with clapboard
Prices for popular models of hammer drills
Perforators
Preparing walls for cladding
Before starting work, it is necessary to prepare the surfaces. This is required so that the lining is well attached, the walls do not crumble, and fungus and mold do not appear on them. To do this, it is worth sealing the cracks with plaster, eliminating unevenness and treating the surfaces with an antifungal solution.
You also need to prepare the working tools in advance.
If the balcony is cold, you should take care of the choice of insulation. Consult with a specialist on how to lay the insulation.
Consider what kind of finish the finished sheathing will have.
Balcony cladding can be done efficiently georgia mobile database if you have all the tools and materials listed below.
To work you will need:
high power hammer drill or drill;
screwdriver;
drills (1 mm, suitable in size for self-tapping screws);
high-quality drills, 4 and 6 mm in diameter;
hacksaw or jigsaw for wood;
level;
a simple pencil, tape measure, set square;
hammer and axe;
30 mm nails with a large head, dowels; for perfectly flat surfaces, dowels 6*60 are suitable, but for minor irregularities - 6*100.
Tools for finishing a balcony with clapboard
Prices for popular models of hammer drills
Perforators
Preparing walls for cladding
Before starting work, it is necessary to prepare the surfaces. This is required so that the lining is well attached, the walls do not crumble, and fungus and mold do not appear on them. To do this, it is worth sealing the cracks with plaster, eliminating unevenness and treating the surfaces with an antifungal solution.