Marmofloat plaster based on slaked lime with marble chips

[zihadhosenjm40]

For example, Venetian plaster from Baldini has unique water- and dirt-repellent properties. Such properties of the material were obtained by adding special wax components to the composition. This means that such a decorative coating (from the company) Baldini can be safely used to decorate the walls of bathrooms - it is not afraid of moisture.

Why are the company's products so popular not only in the EU countries, but also in Russia? Because it has another undoubted advantage, in addition to all of the above - Baldini paints are created on the basis of a natural material - limestone. Environmental friendliness is clearly confirmed: 2002 turned out to be a significant year for the company, it was the first of the Italian manufacturers of a similar focus to be recognized by the EU as a brand whose products fully comply with the Ecolable brand.

The convenience of using finishing materials from also lies in the fact that thorough processing of the walls to a perfectly smooth surface is not required - decorative coatings can be applied to walls with an uneven, rough structure. In the Russian Federation - the only company that gives a ten-year guarantee on its products.

Product Description
The product item is out of date
Pay attention to the 3D fence from the manufacturer!

MARMOFLOAT
Plaster based on slaked lime with marble chips

Main characteristics

— prevents the formation of mould
— vapour permeable
— disinfectant
Tinting / Colour
Marmofloat can be tinted with Ossidi colourants according to Baldini Tecnicolor Ossidi Tinting System or Edilizia Universal colourants according to Baldini Tecnicolor Edilizia.
Classification UNI 8681
E.2/4.COA2.SA
Base and top coat, water-dispersion, one-component, lime-based, quick-drying, matt.

Application method: Being a limestone material, MARMOFLOAT is suitable for creating textures and even for restoration. The product is based on natural white, water-hardening limestone, has high vapor permeability, excellent adhesion and strength, and contains a small amount of water-soluble salts. Apply to breathable surfaces and polish with a cloth. Do not apply to surfaces painted with film-forming materials (plaster, emulsion paints, etc.).
Application: After appropriate surface treatment, moisten the wall, stir the material thoroughly and apply with a stainless steel trowel. For best results, apply a 2nd coat after 24 hours. If uneven areas appear, apply 2 coats of MARMOFLOAT to avoid uneven absorption. If a smooth, translucent surface is required, the finishing coat should be leveled by pressing with a spatula at an angle of 45°. With ideal application, the coating thickness is 0.8 mm with an average material consumption.

Practical advice (Application tips): The colour of the material may vary depending on the batch. This depends on the amount of marble powder in the product.
Protect from freezing. Close carefully after use. The base must be sri lanka mobile database to constantly damp surfaces. Do not apply the coating in direct sunlight, or on windy or hot days.
Due to the natural components of the coating, the shade of the final layer will depend on the absorption of the surface and climatic conditions.
Since the coating contains a natural composition, the mass may contain a small amount of unslaked particles.
After finishing work, the tool must be immediately washed with water.
Application conditions:
Ambient temperature min 10°C / max 35°C
Relative humidity of the environment: < 75%;