the garage with your own hands allows you to successfully solve the following problems:

[zihadhosenjm40]

The holes are drilled with a hammer drill. The nozzles are selected taking into account the hardness of the material and the thickness of the walls.
The entrance (4) is made at a height of 100-200 mm from the level of the final floor covering. The exit (3) is at the same distance from the ceiling.
The greater the height (1), the greater the system's performance can be achieved. But it should be taken into account that an excessively bulky structure will have to be reinforced to protect against strong gusts of wind. Experts recommend installing the upper cut of the pipe 20-30 cm higher than the roof ridge.
A deflector (2) of the appropriate size is purchased in the store. This product accelerates the air flow and prevents precipitation from entering the pipes.
The connection of individual parts and sealing of joints can be done using a construction sealant. The composition is selected for use in the appropriate temperature range.
A special grille will provide protection from rodents and insects. A device for natural ventilation in a garage with a check valve

This inexpensive device prevents cold air from entering from the outlet pipe during the winter. Such equipment is used if one ventilation duct is connected to several rooms.

Drawing of natural ventilation in a garage with a basement of two levels

Fresh air is supplied by a pipe to the lowest point of the object. In addition to the option shown in the figure, additional outlets can be made. It is necessary to ensure that the cross-section of the supply and exhaust tracts is equal. In order to better ventilate the entire volume of the room, the openings are not installed on the same axis.

Wide possibilities of forced ventilation in the garage
The long length and complex configuration of the air duct increase pressure losses. Sometimes it is necessary to increase the pressure, but there is no way to expand the technological openings. Using special tables and formulas, specialized specialists perform an accurate calculation of garage ventilation for work in difficult conditions. The results obtained are used to select the appropriate equipment.

Creating forced ventilation in

Efficient supply and removal of air in the presence of tees, filters, and other additional system components that create obstacles.
Precise dosing of productivity. Use of optimal operating modes to reduce energy costs.
Preliminary retention of contaminants using various filtration technologies.
Increasing the temperature of incoming air using heating elements.
Maintaining user-defined comfortable conditions using air conditioners, other climate control equipment, and sensors.
With the help of forced ventilation in the basement of the garage, you can maintain the desired humidity and temperature regime with high accuracy. Note! Such equipment, with the appropriate electronic and software equipment, will perform its functions automatically, without monitoring and additional settings. It can be honduras mobile database to remote and remote control devices.

Heating and cooling of air, other mentioned operations are accompanied by electricity consumption. When choosing this option, you should take into account the fairly high cost, difficulties in maintenance, repair.

Combined ventilation systems
In projects of this type, natural fresh air inflow is used. For temporary increase of productivity – ventilation equipment is installed in the exhaust duct. This solution is cheaper compared to complex technologies. But with its help it is possible to obtain good results if it is necessary to use complex air ducts.

Contaminants are quickly removed if there is a powerful supply and exhaust ventilation system in the garage.

Such equipment consumes electricity, so it will be necessary to install wiring, devices for protection against voltage surges and engine overheating. If desired, the combined ventilation can be supplemented with motion sensors and timers. They will be useful for automating the system start-up when the car enters, and switching off after a specified time interval.