The ceiling itself also needs to be prepared:

[zihadhosenjm40]

The next step is to prepare the lining itself. This material is made of wood, therefore, it must be protected from moisture, fungi and various insects. Various impregnations are used for this. Each slat must be covered with this agent on all sides and allowed to dry.


Remove all decorative elements (chandelier, lighting, etc.).
Inspect the condition of the ceiling. If you find weak areas of plaster or whitewash, you need to get rid of them.
It is advisable to treat the entire surface with a mold-preventing agent.
If you decide to make a lining ceiling with your ios data hands, you need to prepare the necessary tools and materials. You will need:

a hammer drill for fastening the lathing to the ceiling;
a screwdriver, it will make the work much easier and faster;
various measuring instruments: building level, tape measure, etc.;
hacksaw and knife;
screws, dowels and nails;
battens for lathing.
You will also need to stock up on a stepladder or table so that you can comfortably reach the ceiling.

We carry out installation
Installation of lining

The first thing to talk about before making a ceiling from clapboard is the installation of the lathing. You will hardly be able to do without such a structure. The lathing is a frame made of slats or profiles mounted on the ceiling. It is to it that you will attach the clapboard.

The first step is marking. It is worth considering the direction of laying the lining itself, the slats or profiles of the lathing should lie across. Do not forget to use a level. The lathing should be as even as possible. Otherwise, the lining may skew.

Lathing