Gables made of timber and logs

zihadhosenjm40 · Post by **zihadhosenjm40** » Mon Feb 10, 2025 8:39 am

stall various parts of the rafter system, such as the ridge beam.

When the masonry mortar dries, you can begin laying the rafters. This work begins with fixing the ridge beam at the tops of the gable elements. It is on this beam that the rafters will rest.

Frame gables
Frame gables can be installed over both stone and wooden buildings. Gable elements can be made with a large number of elements. It is affected by the steepness of the slopes, the location of the ridge and the number of window openings. The main element of the gable frame is the post. If the roof is small, you can install only one post, which must be mounted in the middle of the gable structure. The ridge run will rest on it.

If the work is carried out on large structures, two peru mobile database four posts can be used. The first ones take on the main load. They must be installed at a distance of 60-70 cm from the center. The remaining posts must be mounted with the same step.

In addition to the supports, the frame of the gable structures includes purlin legs. The rafters rest on them. If the roof has impressive dimensions, the slope legs are pulled together with a grip. It is necessary to relieve the load from the roofing material on the rafter system. In addition, if it is present, it is more convenient to lay the insulation boards.

These structures are called chopped. Such gable elements must be erected before the rafter system is installed.

To erect such a structure, a log with a diameter of 220 to 250 mm is used. If a beam is used, elements with a cross-section of 150 x 150 mm should be selected. The blanks should have different lengths.

Before installing such gables on the attic floor, it is necessary to install a template of the structure being erected. It is made from bars. It is much easier to understand the sizes of the logs and their trimming using a template. The installation of logs is carried out in the form of a pyramid. Each subsequent log should be made shorter than the previous one.