Wood chipboards are very popular with furniture manufacturers.

[zihadhosenjm40]

smooth, solid colors (eg white, yellow, blue);
textured solid colors (e.g. textured white, aluminum);
standard wood tones (e.g. beech, alder, cherry);
imitation of rare wood species (e.g. Winchester oak, Merano, Cordoba);
glossy decors;
veneered decors;
fantasy tones with patterns and designs.
The last three categories, due to their high cost, are used primarily ecuador mobile database the production of facade parts.

Chipboard is present in almost every home, because it is most often used in the manufacture of various furniture, both economy class and more expensive.
Products made of chipboard are resistant to moisture due to the laminating coating, unlike ordinary wood. Therefore, furniture made of chipboard is well suited for the kitchen, where it will not dry out and crack. It can often be found even in bathrooms. Moisture-resistant chipboard undergoes special treatment with paraffin emulsion, and also contains wood fibers with a special impregnation that prevents swelling of the composition under the influence of moisture. However, you should not leave moisture on the surface of the furniture for a long time, because it can leak into the cracks between the plate and the edging, and water getting directly under the decorative layer (laminating film) will cause swelling and softening inside the plate.
If you buy furniture made of laminated chipboard, you can easily buy the necessary elements later, and they will be exactly the same color, unlike wood, where the shade may differ from batch to batch.

Chipboard has its drawbacks, like any other material.
The main negative characteristic of chipboard is the presence of formaldehyde resins in the composition, which at high concentrations have a negative impact on human health. That is why it is necessary to ensure that the ends of the finished product are carefully covered with an edge.
Another significant drawback is the susceptibility of chipboard to swelling (with the exception of moisture-resistant categories). This problem is eliminated in the same way as the previous one - an edge is applied to all visible ends, protecting the internal composition from moisture penetration.
The laminated surface itself, if there are no cuts or chips on it, is moisture resistant.