The pattern of paving slabs is laid out using the following methods:

[zihadhosenjm40]

To lay out the sand mixture, it is necessary to remove the top layer of soil with grass. Then a layer of sand up to 10 cm is poured. The surface is tamped, watered, left for compaction. Slabs are laid on top of the sand layer.

The technology is carried out using water and is suitable for the design of paths in a garden plot. The method allows preventing stagnation of water in the area.

Creating a sand-cement pad is an economical and brazil mobile database method. You will need to mix purified sand and cement in a ratio of 5:1. The composition is distributed on the surface, then the slabs must be laid. The top layer of the path is treated with water, which penetrates through the seams and ensures long-lasting adhesion of the elements.

The method of laying slabs on mortar is more labor-intensive. Water is added to the mixture of cement and sand and mixed. The composition is placed on the surface with a trowel in a layer of about 4 cm. The slabs are laid out by tapping with a rubber hammer. If the path is sloped, it is necessary to provide for the laying of gutters and a drainage system.

Layout diagrams

use of monochrome blocks of different sizes and configurations;
creating a mosaic from elements of different shades;
design of radius sections.
The patterns use combinations of checkerboard patterns, concentric rows, changes in direction, etc.

Using multi-colored tiles
Paving stones for paths can be single-color or laid out from blocks of different shades in a chaotic manner. The color scheme is selected to match the palette of finishing elements of the site, building. Chaotic combinations of different shades allow you to create an accent zone.

When selecting materials, the texture is determined. To create a neutral coating, you can choose matte surfaces, a coating with an artificial aging effect is created from slabs with scuffs.