The base of the solar coolant should attract the sun's

[zihadhosenjm40]

rays, not reflect them. Therefore, it is better to choose black as its color.

The collector itself should be made of transparent material, for example, transparent plastic or glass tube. But they can be replaced with a regular metal-plastic pipe painted black. Such material for the coolant is very easy to lay and fix in the base of the structure.

The next step is to pay close attention to the heating area. All pipes must be laid very tightly in relation to each other. Therefore, if you think that they will be easy to bend under a small radius of rounding, you are deeply mistaken. To do this, you will have to use a huge number of angular connecting fittings.

Not sure if you need a gas fireplace? Read our article about whether you need a gas fireplace in your apartment first.

Reliable monolithic cast iron stove fireplace for a summer house. To learn more, look here.

With the growth of the currency, the price of the Ariston water heater has also increased. See real modern prices at the

The tubes are fixed to the plastic structure using clips that are specially designed for their installation. End fittings are installed along the edges of the collector: for this purpose, a drain is attached to the upper side through an air tee, and a storage tank is connected to the lower side using a separate tube.

Now you can start making the storage tank. Most likely, no one should have any unnecessary questions like: "What can it be made of?" To make it, you will need an ordinary jordan mobile database water heater. It is in high demand in the winter for its intended purpose, and in the summer it serves as a kind of storage for heated water using solar energy.

Connecting an electric water heater is easy: first, the tank is connected to the existing water supply system using the appropriate method. Then, the lower side of the solar coolant is connected to the cold water pipe using a tee and a shut-off valve. Following the same algorithm, the hot water supply pipe is connected, only it is attached to the upper side of the end fitting.

All stages of the solar heater assembly have come to an end. All that remains is to carefully study the principles of interaction and operation of the system, as well as the principles of its control. There is nothing extremely complicated in this either. You just have to get used to four shut-off valves instead of the usual two - thanks to them, the system will switch from summer to winter mode and vice versa.

In summer, you need to use all four taps and turn off the electricity supply. And in winter, turn off two taps and turn on the electricity supply. to menu