Fastening with finishing nails

[zihadhosenjm40]

Manufacturing
Having selected the material and prepared the necessary tool, you can begin making door trims. First, the blanks are cut to the required dimensions, which are calculated individually for each door. It is worth noting here that the quality of the result directly depends on how sharp the cutting knives are on the machines and machines.

When the casing is ready, it is sanded. This is egypt mobile database in two stages: the first is rough sanding with an electric machine, the second is manual processing with fine-grained sandpaper. At the second stage, all circular scratches left by the electric machine should be removed. The finished casing is covered with a protective compound.

How to attach door trims
There are four main ways to attach door trims: using finishing and liquid nails, self-tapping screws, or special fasteners called “beaks”.


This is one of the most popular methods. It has a number of advantages: if necessary, the casings are easy to dismantle and reinstall, and the fastening process itself is simple and reliable.

To attach the door frames, nails with a flat, narrow head are selected. Their length is easy to calculate; they should go into the door frame to a depth of 1.5-2 cm. The average length of finishing nails for door frames is about 4 cm.

Tip: If you can't find flat-headed nails, you can cut them off with side cutters.

To make the work easier, the mounting points are marked on the casings in advance. They are placed at equal distances from each other along the entire length of the strip. The main thing here is to maintain the necessary balance; it is not recommended to place them too often, but it is also bad to place them too rarely. Experts advise maintaining a distance of 50 cm.